Demo site by Demand & ConvertWant a website like this? Get a free website + a 60-day free Local SEO trial.Get my free website

How to Test Flooring Samples in Your Own Room

Steve Chhay Roomview Floors

3 min read

Updated:

A flooring sample can look perfect in a store and wrong in your living room. The sample did not change. The light, the walls and everything around it did. Here is how to test samples at home so you can choose with confidence.

Get the biggest sample you can

A small square shows you the color and not much else. Wood and wood-look floors vary from plank to plank, with knots, grain and lighter and darker boards. Ask for full planks, and for more than one of each floor. Three or four planks side by side show you the range you will see across a room.

Put the samples on the floor

It is tempting to hold a sample up or prop it on a counter. Floors are seen from above and at a low angle, so lay the planks flat on the floor where they will go. Push them together the way they would be installed.

Look at them at different times of day

Light changes color more than most people expect.

  • Morning and evening sun is warm and brings out red and yellow tones.
  • Midday light is cooler and shows the floor closer to its true color.
  • Lamps and ceiling lights at night can make a gray floor look flat or a warm floor look orange.

Leave the samples down for a couple of days and look at them each time you pass.

Check them against what is staying

A floor does not sit alone. Move the samples next to the things that are not changing:

  • Kitchen cabinets and counters
  • Baseboards, door frames and stair rails
  • A brick or stone fireplace
  • Large furniture and rugs
  • The floor in the next room, where the two will meet

You are looking for a floor that gets along with these, not one that matches them exactly. A floor a few shades lighter or darker than wood cabinets often looks better than a near match.

Stand back and walk past

Look at the samples from the doorway, which is how you will first see the room. Then walk past them. Note how much the pattern stands out from a distance. A floor with strong grain or a lot of color change can look busy across a large room and lively in a small one.

Do a few real-life tests

  • Sprinkle a little dust or a few crumbs on each sample. Very dark and very light floors both show more.
  • If you have a pet, see how its hair shows up.
  • Run a fingernail lightly across the surface to feel the texture and see how it marks.
  • Step on it with socks and with shoes. Some finishes feel smoother than others.
  • Look at the sheen with a window behind it. A glossy floor shows footprints and scratches more than a matte one.

Narrow it to two

Too many choices make it harder, not easier. Rule out the ones that are clearly wrong on the first day. Keep two finalists and live with them a little longer. Most people find that one of them starts to feel like part of the room.

Ask the practical questions

Before you settle, check that the floor suits the room and not just your eye.

  • Can this product handle the moisture in a kitchen, a bath or a room over a crawl space?
  • What does it need under it?
  • How thick is it, and how will it meet the floors in the next rooms?
  • How is it cleaned?

Take a photo, but trust your eyes

Photos are handy for comparing later, but phone cameras shift color. Use them as notes. Make the decision standing in the room.

If you would like help, call Roomview Floors. We bring full-size planks to your home, lay them out with you and measure the rooms while we are there.

Not sure which floor fits your room?

Tell us about the room and we will bring samples you can lay on your own floor.

Book a Free Measure(804) 555-0131 or send us the details
Call